Are you looking for a technique to increase the safety of your property? Are you looking out for an clever doorbell that may allow you to control your entrance door irrespective of the place you might be? Chances are you’ll now relaxation simple realizing that the Ring Doorbell is the reply to all of your queries. This text will stroll you thru the method of organising your Ring Doorbell step-by-step, making certain that you’ve got a stress-free expertise.
Earlier than we begin, be sure to have the next instruments and supplies available: a drill, a screwdriver, a degree, a hammer, a pencil, and a tape measure. To put in your Ring Doorbell efficiently, additionally, you will want the next: a Ring Doorbell, a mounting bracket, a doorbell transformer, doorbell wires, and a screwdriver. After you have collected the entire needed provides, you may start organising your Ring Doorbell.
Armed with the required instruments and supplies, you are now able to dive into the set up course of. Don’t fret, we’ll break it down into manageable steps so you may get pleasure from peace of thoughts realizing you’ve got secured your property’s entry level.
Learn how to Set up Ring Doorbell
Earlier than you begin the set up, be sure to collect all the required instruments and supplies, together with the Ring Doorbell, mounting bracket, doorbell transformer, doorbell wires, drill, screwdriver, degree, hammer, pencil, and tape measure.
- Flip off energy to doorbell.
- Take away present doorbell.
- Set up mounting bracket.
- Join doorbell wires.
- Mount Ring Doorbell.
- Stage and safe Ring Doorbell.
- Restore energy to doorbell.
- Check Ring Doorbell.
After you have put in your Ring Doorbell, obtain the Ring app and comply with the on-screen directions to finish the setup course of. You’ll be able to then use the app to regulate your Ring Doorbell and obtain notifications when somebody rings your doorbell or triggers the movement sensor.
Flip off energy to doorbell.
Earlier than you start putting in your Ring Doorbell, it’s important to show off the ability to your present doorbell. This may forestall any electrical shocks and guarantee that you would be able to work safely.
-
Find your doorbell breaker.
That is normally positioned in your house’s electrical panel. The doorbell breaker is often labeled “Doorbell” or “Chime.”
-
Flip off the doorbell breaker.
After you have discovered the doorbell breaker, flip it to the “Off” place. This may reduce off energy to your doorbell.
-
Check the doorbell.
Press the doorbell button to ensure that it’s now not working. If the doorbell nonetheless rings, then you haven’t efficiently turned off the ability. Test the breaker once more and ensure that it’s within the “Off” place.
-
Take away the quilt out of your doorbell chime.
After you have confirmed that the ability is off, you may take away the quilt out of your doorbell chime. This may expose the doorbell wires.
Now that you’ve got turned off the ability to your doorbell, you may safely proceed with the set up of your Ring Doorbell. Keep in mind to all the time comply with the directions supplied within the Ring Doorbell person handbook.
Take away present doorbell.
After you have turned off the ability to your doorbell, you may proceed with eradicating the prevailing doorbell. This course of will range relying on the kind of doorbell you’ve got.
-
Take away the doorbell button.
The doorbell button is often held in place by one or two screws. Use a screwdriver to take away the screws after which gently pry the doorbell button off the wall.
-
Disconnect the doorbell wires.
After you have eliminated the doorbell button, you will note two wires linked to the again of the button. These are the doorbell wires. Use a pair of pliers to twist the wire nuts counterclockwise after which pull the wires aside.
-
Take away the doorbell chime.
The doorbell chime is normally positioned inside your property, close to the entrance door. Take away the quilt from the chime after which disconnect the wires from the chime terminals. As soon as the wires are disconnected, you may take away the chime from the wall.
-
Patch the holes.
After you have eliminated the doorbell button and chime, you’ll be left with two holes in your wall. You’ll be able to patch these holes with spackling compound or caulk.
Now that you’ve got eliminated the prevailing doorbell, you might be prepared to put in your Ring Doorbell. Be certain that to comply with the directions supplied within the Ring Doorbell person handbook.
Set up mounting bracket.
The mounting bracket is what’s going to maintain your Ring Doorbell in place. You will need to set up the mounting bracket appropriately, in order that your Ring Doorbell is degree and safe.
-
Select a location for the mounting bracket.
One of the best location for the mounting bracket is subsequent to your entrance door, at a peak of about 4 ft from the bottom. Make it possible for the situation you select is degree and that there aren’t any obstructions, equivalent to bushes or shrubs, that may block the view of the Ring Doorbell.
-
Mark the situation of the mounting holes.
Use a pencil to mark the situation of the 2 mounting holes on the wall. Make it possible for the marks are degree.
-
Drill the mounting holes.
Use a drill to drill two holes on the marks you made within the earlier step. The holes must be deep sufficient to accommodate the anchors that got here with the Ring Doorbell.
-
Insert the anchors.
Insert the anchors into the holes you simply drilled. Faucet the anchors in with a hammer till they’re flush with the wall.
-
Screw the mounting bracket to the wall.
Use the screws that got here with the Ring Doorbell to screw the mounting bracket to the wall. Make it possible for the mounting bracket is degree and safe.
Now that you’ve got put in the mounting bracket, you might be prepared to attach the doorbell wires and mount the Ring Doorbell.
Join doorbell wires.
After you have put in the mounting bracket, it’s essential to join the doorbell wires to the Ring Doorbell. The Ring Doorbell has two terminals, labeled “Entrance” and “Rear.” The entrance terminal is for the wire that comes out of your doorbell button, and the rear terminal is for the wire that goes to your doorbell chime.
To attach the doorbell wires, comply with these steps:
-
Strip the ends of the doorbell wires.
Use a wire stripper to take away about 1/2 inch of insulation from the ends of the doorbell wires. -
Twist the ends of the doorbell wires collectively.
Twist the ends of the 2 doorbell wires collectively tightly. -
Insert the twisted wires into the terminals on the Ring Doorbell.
Insert the twisted wires into the “Entrance” and “Rear” terminals on the Ring Doorbell. Make it possible for the wires are inserted all the way in which into the terminals and that they’re making good contact. -
Tighten the terminal screws.
Use a screwdriver to tighten the terminal screws till the doorbell wires are safe.
Now that you’ve got linked the doorbell wires, you might be able to mount the Ring Doorbell to the mounting bracket.
Word: In case you are putting in a Ring Doorbell Professional, additionally, you will want to attach the ability adapter to the Ring Doorbell Professional. The facility adapter plugs into an outlet close to your doorbell.
Mount Ring Doorbell.
Now that you’ve got linked the doorbell wires, you might be able to mount the Ring Doorbell to the mounting bracket.
-
Align the Ring Doorbell with the mounting bracket.
Place the Ring Doorbell over the mounting bracket in order that the screw holes on the Ring Doorbell line up with the screw holes on the mounting bracket.
-
Insert the screws.
Insert the screws that got here with the Ring Doorbell into the screw holes. Make it possible for the screws are tight and that the Ring Doorbell is safe.
-
Stage the Ring Doorbell.
Use a degree to ensure that the Ring Doorbell is degree. If the Ring Doorbell shouldn’t be degree, loosen the screws and alter the place of the Ring Doorbell till it’s degree.
-
Tighten the screws.
As soon as the Ring Doorbell is degree, tighten the screws till they’re cosy.
Now that you’ve got mounted the Ring Doorbell, you may restore energy to the doorbell and take a look at the Ring Doorbell.
Stage and safe Ring Doorbell.
After you have mounted the Ring Doorbell to the mounting bracket, it is very important degree and safe it.
-
Use a degree to examine if the Ring Doorbell is degree.
Place a degree on high of the Ring Doorbell. If the bubble within the degree is centered, then the Ring Doorbell is degree. If the bubble shouldn’t be centered, then it’s essential to alter the place of the Ring Doorbell till it’s degree.
-
Tighten the screws that safe the Ring Doorbell to the mounting bracket.
Use a screwdriver to tighten the screws that safe the Ring Doorbell to the mounting bracket. Make it possible for the screws are tight and that the Ring Doorbell is safe.
-
Apply silicone sealant across the edges of the Ring Doorbell.
This may assist to weatherproof the Ring Doorbell and stop water harm. Use a caulk gun to use a skinny bead of silicone sealant across the edges of the Ring Doorbell.
-
Enable the silicone sealant to dry fully.
Earlier than you take a look at the Ring Doorbell, enable the silicone sealant to dry fully. This will likely take a number of hours or in a single day.
After you have leveled and secured the Ring Doorbell, you may restore energy to the doorbell and take a look at the Ring Doorbell.
Restore energy to doorbell.
After you have put in the Ring Doorbell and examined it, you may restore energy to the doorbell.
-
Activate the doorbell breaker.
Find the doorbell breaker in your house’s electrical panel. Flip the breaker to the “On” place. This may restore energy to the doorbell.
-
Check the Ring Doorbell.
Press the doorbell button to ensure that the Ring Doorbell is working correctly. The Ring Doorbell ought to mild up and you must hear a chime inside your property.
-
Obtain the Ring app.
If you have not already accomplished so, obtain the Ring app from the App Retailer or Google Play Retailer. Create an account and comply with the on-screen directions to attach your Ring Doorbell to your Wi-Fi community.
-
Arrange your Ring Doorbell.
As soon as your Ring Doorbell is linked to your Wi-Fi community, you should use the Ring app to arrange your Ring Doorbell. This contains setting your movement detection settings, privateness settings, and notification settings.
Now that you’ve got restored energy to the doorbell and arrange your Ring Doorbell, you can begin utilizing it to observe your property and reply the door from anyplace.
Check Ring Doorbell.
After you have restored energy to the doorbell and linked it to your Wi-Fi community, you must take a look at the Ring Doorbell to ensure that it’s working correctly.
-
Press the doorbell button.
The Ring Doorbell ought to mild up and you must hear a chime inside your property.
-
Open the Ring app.
In your smartphone, open the Ring app and faucet on the Ring Doorbell that you simply wish to take a look at.
-
View the reside video feed.
It is best to now have the ability to see a reside video feed from the Ring Doorbell. When you do not see a reside video feed, examine to ensure that the Ring Doorbell is linked to your Wi-Fi community and that the Ring app is updated.
-
Check the movement detection.
Stroll in entrance of the Ring Doorbell and see if the movement sensor is triggered. The Ring Doorbell ought to ship you a notification in your smartphone when the movement sensor is triggered.
In case you are having issues testing your Ring Doorbell, you may contact Ring help for assist.
FAQ
Have extra questions on putting in your Ring Doorbell? Try these regularly requested questions and solutions.
Query 1: What instruments do I want to put in my Ring Doorbell?
Reply 1: You’ll need a drill, a screwdriver, a degree, a hammer, a pencil, and a tape measure. Additionally, you will want the Ring Doorbell, a mounting bracket, a doorbell transformer, doorbell wires, and a screwdriver.
Query 2: Do I want to show off the ability to my doorbell earlier than I set up it?
Reply 2: Sure, you must all the time flip off the ability to your doorbell prior to installing it. This may forestall any electrical shocks and guarantee that you would be able to work safely.
Query 3: How do I join the doorbell wires to the Ring Doorbell?
Reply 3: The Ring Doorbell has two terminals, labeled “Entrance” and “Rear.” The entrance terminal is for the wire that comes out of your doorbell button, and the rear terminal is for the wire that goes to your doorbell chime. Twist the ends of the doorbell wires collectively and insert them into the terminals on the Ring Doorbell.
Query 4: How do I mount the Ring Doorbell to the wall?
Reply 4: First, set up the mounting bracket on the wall. Then, align the Ring Doorbell with the mounting bracket and insert the screws. Make it possible for the Ring Doorbell is degree and safe.
Query 5: How do I take a look at my Ring Doorbell?
Reply 5: After you have put in the Ring Doorbell, activate the ability to the doorbell and press the doorbell button. The Ring Doorbell ought to mild up and you must hear a chime inside your property. You may as well take a look at the movement detection by strolling in entrance of the Ring Doorbell.
Query 6: What do I do if I am having issues putting in my Ring Doorbell?
Reply 6: In case you are having issues putting in your Ring Doorbell, you may contact Ring help for assist.
Query 7: Can I set up my Ring Doorbell myself?
Reply 7: Sure, you may set up your Ring Doorbell your self. Nonetheless, if you’re not snug working with electrical wiring, you could wish to rent an expert to put in it for you.
Closing Paragraph for FAQ: These are just some of probably the most regularly requested questions on putting in a Ring Doorbell. If in case you have every other questions, please seek the advice of the Ring Doorbell person handbook or contact Ring help.
Now that you understand how to put in a Ring Doorbell, listed below are a number of suggestions that can assist you get probably the most out of your new doorbell.
Suggestions
Listed below are a number of suggestions that can assist you get probably the most out of your new Ring Doorbell:
Tip 1: Select the suitable location in your Ring Doorbell.
One of the best location in your Ring Doorbell is subsequent to your entrance door, at a peak of about 4 ft from the bottom. Make it possible for the situation you select is degree and that there aren’t any obstructions, equivalent to bushes or shrubs, that may block the view of the Ring Doorbell.
Tip 2: Use a robust Wi-Fi sign.
The Ring Doorbell requires a robust Wi-Fi sign to perform correctly. If in case you have a weak Wi-Fi sign within the space the place you wish to set up the Ring Doorbell, you could want to make use of a Wi-Fi extender or booster to enhance the sign energy.
Tip 3: Arrange movement detection and notifications.
The Ring Doorbell has a built-in movement sensor that can be utilized to set off notifications in your smartphone. You’ll be able to customise the movement detection settings to solely obtain notifications for sure sorts of movement, equivalent to individuals or automobiles.
Tip 4: Join your Ring Doorbell to different good dwelling gadgets.
The Ring Doorbell may be linked to different good dwelling gadgets, equivalent to good lights and good locks. This lets you create automated actions, equivalent to turning on the lights when somebody rings the doorbell or unlocking the door if you reply the doorbell out of your smartphone.
Closing Paragraph for Suggestions: By following the following tips, you may get probably the most out of your new Ring Doorbell and revel in the entire advantages that it has to supply.
Now that you understand how to put in and use your Ring Doorbell, you may benefit from the peace of thoughts that comes with realizing that you would be able to monitor your property and reply the door from anyplace.
Conclusion
Putting in a Ring Doorbell is a good way to enhance the safety of your property and control your property. By following the steps on this information, you may simply set up your Ring Doorbell your self and begin having fun with the entire advantages that it has to supply.
Abstract of Essential Factors:
- Flip off the ability to your doorbell earlier than you start set up.
- Take away your present doorbell.
- Set up the mounting bracket.
- Join the doorbell wires to the Ring Doorbell.
- Mount the Ring Doorbell to the mounting bracket.
- Stage and safe the Ring Doorbell.
- Restore energy to the doorbell.
- Check the Ring Doorbell.
Closing Message: Along with your Ring Doorbell put in, now you can get pleasure from peace of thoughts realizing that you would be able to monitor your property and reply the door from anyplace. You may as well use the Ring Doorbell to attach with different good dwelling gadgets and create automated actions to make your property much more safe and handy.
